Monogrammed Napkin Tutorial

These pretty monogrammed napkins are a great last minute gift. They take less than 1 hour to make, with the exclusion of washing and drying the napkins.

How To

Materials:

• Napkins, I used
• Iris Napkins from Ikea ($1.99 per 4)
• A Monogram
• Iron-on transfer paper
• A computer and printer
• Iron

Process:

1. Wash and dry your napkins as per their washing instructions to remove any chemicals present on the napkins.
2. Create or find your monogram.  I used Photoshop to modify a font that suited my purposes.
3. Using regular paper test print your picture, using all of the settings you plan to use in the final printing.  Make sure this test printing is the correct size and color, and is printed in a mirror image if your picture needs to be read.
4. If necessary modify your picture and test print again, until the picture is perfect.
5. Print your final image on iron-on transfer paper (remember you will need one monogram for each napkin).
6. Following the directions on your transfer paper, iron the monograms onto the corner of your napkins.

Beginning Spinning

2 ounces of Baby Merino Pencil Roving spun in singles.

I bought the roving last October at SAFF, and I finally got around to spinning it about a month ago.  I think I did pretty good.  The singles are similar in diameter, and while they are slightly over spun it should help the singles hold together if I decide to ply them.

I found the baby Merino soft and smooth, pulling apart easily unless tightly spun.  The put up in pencil roving made it ridiculously easy to draft.  The roving seemed to want to be lace weight, but I am still not a fast enough drafter to spin a thinner diameter.

I am currently spinning regular Merino in normal roving put up.  I am planning to ply this fiber and I hope to show pictures of my progress soon.

Monogrammed Napkin Tutorial

These pretty monogrammed napkins were a last minute Christmas gift for Mr. Incredible's grandparents.  I needed a quick present, but I wanted it to be nice too.  These napkins took less than 1 hour to make, with the exclusion of washing and drying the napkins.

How To

Materials:

Napkins, I used Iris Napkins from Ikea ($1.99 per 4)

A picture you want to put on the napkins

Iron-on transfer paper

A computer and printer

Iron

Process:

1.  Wash and dry your napkins as per their washing instructions to remove any chemicals present on the napkins.

2.  Create or find your picture.  I used photoshop to modify a font that suited my purposes.

3.  Using regular paper test print your picture, using all of the settings you plan to use in the final printing.  Make sure this test printing is the correct size and color, and is printed in a mirror image if your picture needs to be read.

4.  If necessary modify your picture and test print again, until the picture is perfect.

5.  Print your final image on iron-on transfer paper.

6.  Cut out your picture.  I use an exacto knife, and cut out all of the unprinted areas, leaving a small border on all sides.

6.  Then transfer your image based on the packages instructions.  Make sure your iron setting is not too high for your fabric.

Enjoy!

Gift Idea 5: Heated Eye Mask

Christmas keeps comming closer, as inevivible as the passage as, well, time.  With it comes more Christmas presents.  I made this eye mask out of recycled materials for my grandmother who has eye problems.  If you have all of the materials on hand, and hour can see several made.

Materials for One Eye Mask:

1.  Burda Style Pattern Marcel #7997.  This is a free download, and the entire pattern should fit on a standard piece of paper.

2.  Two pieces of soft fabric approx. 9" by 5".  I got enough fabric for 3 masks from the front of a cotton dress shirt (the rest of the shirt had already been repourposed as napkins.
3.  Flat batting in the same amounts as the fabric above (optional).  I used cotton batting let over from a quilt, but fleece, or rescused batting would work well too.

4.  50" to 60" of ribbon, .75" to 1" wide, cut in half.  Deside on the total amount of ribbon you want to use based on head size. I used the ribbon from a kids store's elaborate gift wrapping.  One package yielded more than enough ribbon.

5.  Rice.  I used about 0.125 pounds of inexpensive long grain rice.  You can probably find enough in your pantry.

Instructions:

If you know how to sew, this will probably be a no brainer, but Burda Style has no instructions on this pattern (as of this writting), so....

1.  After printing and cutting out the Marel pattern, pin the pattern piece to your fabric (with the grain of the fabric), mark the side openings noted on the pattern on your fabric, and cut the fabric in pattern.  Do this so that you get two pieces of fabric in pattern shape, then do the same with the batting.

2.  Make the following fabric/batting sandwich; (Beginning on the bottom) batting, fabric (right side up), fabric (right side down), batting.  Then stitch around the edges of the mask with a 5/8" seam allowance, leaving the spaces that were marked "ribbon" on the pattern open.

3.  Turn your "sandwich" inside out.  The fabric should now be on the outside, the batting on the inside.

4.  Insert one of the ribbons about 1" into the ribbon slot, fold the fabric around the ribbon slot inward to that it looks as if it had been sewn with the rest of the eye mask.  Sitich the ribbon in place very close to the edge of the mask. DO NOT SEW THE OTHER RIBBON IN PLACE AT THIS TIME.

5.  The ribbon slot on the other end of the mask is still open.  Use this opening to pout in your rice.  Make a funnell with a spare bit of paper, stick the small end in the ribbon slot, and pour the rice in the large end.  Pour in enough rice so that half of the eye mask is full.

6.  With the rice at the opposite end of the mask, attach the 2nd ribbon as shown for the first in step 4.

~Happy Holidays

Edit:  If you would like to heat the eye mask, place it in the microwave for 30 seconds to 1 minute.  Test it's temperature on the sensitive part of your arm before placeing it on your eyes.  It should be warm, NOT hot.

Mini Stocking Advent Calender

The website Burda Style has recently published a free and easy stocking advent calender pattern. They even have a step by step tutorial that makes this project easy as pie for even beginners.

The stockings are small enough to use up scraps of fabric and ribbon, and they sew up quick enough that they could still be made before December. Even if you couldn't make them all in one go, you could make them one per day in December taking only a few minutes per day. Pictures of a few of mine are below.

Not interested in the stockings? You should still check out Burda Style. They have beginner to advanced sewing patterns that are mostly free, and great sewing info, and several quick holiday projects (even a few for ambitious hand sewing).I made all of my stockings thus far out of home dec weight fabric leftovers from other projects (mine, and the leftovers I have collected from other crafters), and scraps of ribbon. I really love the eclectic look.

Gift Idea 3: A Gift Your Toddler Can Make

Recently my friend K (a former elementary school art teacher) e-mailed to tell me about Crayola's Model Magic - a kind of modeling clay that doesn't stick to anything and dries to a flexible firmness after being left out of it's bag for about 24 hours. Since we both tend to stick to basic art supplies, like crayons and glue, I took the suggestion of such a high tech medium as high praise. She suggested that Violet - my 3 year old - would be able to work with it, and unlike traditional clay the finished product wouldn't easily crack in toddler hands.

We bought some on our next trip out, and Violet set out to make a present for her Granny. While I suggested what to make and how to make it, she did nearly all of the work herself.

Granny likes butterflies, so she is using cookie cutters to cut out butterfly shapes.
I poked a hole through the tops so they can be strung on ribbon and hung as ornaments.
After the medium is dry it can be painted.
I think they turned out beautifully.

Gift Idea 2: Recycled Candles Tutorial

My kids love candles. They take an especial fancy to expensive pillars and delicate tapers, taking chunks out of them with their sharp little finger nails (so they smell nice), or brandishing them as swords while they wage epic battles with one another. However, their favorite thing to do with candles is carry them by their wicks, breaking them off in the process. Needless to say, candles in my house rarely live out their natural lives, turning slowly into stumpy little bits of over used wax. Our candles are broken, nicked, shapeless, wickless, masses of wax that have never been used. I hate to throw it out. The result; recycled candles.

How to Make Recycled Candles:

Supplies:

1. Broken Candles (feel free to mix colors, but be warned, mixing complementary colors like red and green will make muddy brown)
2. Wick (salvaged, homemade, or store bought)
3. Pretty Heat Safe Jar that the finished product will reside in
4. Something stiff that is longer than the jar's opening - like a pencil
5. A small heavy object to attach to the wick -like a washer (may not be needed if using a store bought wick)
6. A disposable, microwave and heat safe container to melt the wax in - like a paper cup or something from the recycling bin
7. A Microwave
8. A knife and cutting surface

Steps:
Using your cutting board and knife, cut your wax so that it go from resembling small rocks, like this.........to small pebbles, like this.
Place your small pieces of wax in your microwave safe container, and microwave on high until the wax obtains a liquid texture. Make to to check that the wax has not escaped it's container every 30 seconds to one minute.

While you are waiting for your wax to melt, prepare your jar to receive it. First attach your heavy object to your wick. As you can see, I simply tied a square knot around a washer. This is to make sure your wick stays in place while the wax is poured in the container.

Next, place the wick in the jar with the heavy object in the bottom of the jar, and the other end wrapped around something stiff covering the opening of the jar (I used a wrench because it was on hand). Be sure to center the wick over the middle of the jar, unless you would like an avant guard and likely shorted lived candle.
When the wax reaches liquid state, pout it into the jar.....
.....and let it cool.Once it is cooled, snip the wick to 1/4th of an inch.An your beautiful candle is ready to go.

Enjoy!

Gift Idea 1: Melt-and-Pour Soap tutorial

I have a huge family, and as a result I am constantly trying to find or make nice gifts for lots of people at low cost. This year my mother's sisters will be receiving melt-and-pour lavender soap.

Unlike soap made from scratch, melt-and-pour soap is quick, easy, fairly safe, and can be made in small batches. The following is a quick tutorial on making melt-and-pour soap.

Tutorial
1. Buy melt and pour soap base. It can be found at Michaels, Joann's, and most other craft stores. I got mine from Brambleberry.com which has great prices for large amounts. I am using an opaque goat's milk soap.
2. Find a heat safe mold. You can buy these at craft stores, but there is no need. I used paper cups left over from a party (this was their 2nd use, and they have at least 1 more use in them if not more).
3. If you would like to add anything to the soap, like herbs, put them in the bottom of your mold. I used dried lavender grossa, a non-flowering version of lavender that grows well in my Florida garden. Other herbs or flower petals also look nice, but some discolor in heat, so you may want to test whatever you use before you make a large batch.
4. Melt your soap base in the microwave (on high checking the soap every 30 seconds) or a double broiler (being careful not to get any water in the soap). Add a few drops of the essential oil of your choice after taking the soap off the heat. I melted about 14 ounces of soap base, and added 8 drops of lavender essential oil for a mild lavender scent.

As soon as your EO is mixed in, pour the soap base into your prepared molds. The herbs will rise and mix on their own, but you can mix it yourself while the soap base is still very hot.
5. When the outside of the mold is cool to the touch you can squeeze the sides gently and pop the soap out. The soaps seen below are about 2 ounces each, and about half the size of the bars of soap you get at the grocery store.

Alternative method: You can also weigh the amount of soap you want in each bar, place that amount in your mold, then microwave the mold to melt the soap.

How much? I already had all of the materials I needed on hand, so I didn't spend anything. However, joann.com has 2 pounds of olive oil soap base for only $9.99. That is enough to make 16 2 ounce bars. If you gave 2 bars per person, that would be only $1.25 per gift. Not too bad!

Note: Melt-and-Pour soap does not have to cure like soap made from scratch, but it will sweat for a few days after it's made (due to it's high glycerin content), especially in high humidity. So, it is a good idea to wait a few days before wrapping it in plain paper - although wax paper does a good job.

Enjoy!

Potato Stamps

My daughter and I made these shirts for her a while ago. She really enjoys wearing them.Here is the super simple process we used to make them;

1. Cut a potato in half (I used small new potatoes yielding 2 stamps).
2. Using a sharp knife cut a simple design in the flat side of the potato. Remove the excess potato around the design.
3. Blot the potato on a dry rag.
4. Apply paint or ink to the potato that is appropriate for the surface you will be stamping on (we used fabric paint). Remove any excess by blotting.
5. Apply to your surface in whatever pattern you desire (my patterns were regular, but my daughter loves her very irregular stamp pattern).
6. Repeat. Use your potato stamp as much as possible in the next day or two, storing in the fridge between uses. The potato will go bad and need to be tossed in a few days.
7. Allow your surface to dry as your medium indicated before using.

Told you it was simple, and they look really cute!

Craft Table $2

Both of my kids are now coloring, and doing "crafts" (gluing or cutting paper). Their crafts supples were everywhere, until I decided to give them a place of their own to create their masterpieces. The end result was their craft table.

A while ago my SiL was painting and decorating children's tables and chairs, and selling them a local stores. One of her tables was imperfect and wasn't put up for sale. Instead it put up residence in my in-law's barn, and later their dining room. When my kids needed a table, I asked my MiL if she would be willing to part with the tiny table holding clutter (as all extra furniture does) in her dining room. She was happy to put the table to better use. Unfortunately the table's time in the barn allowed it to mold. The table had to be sanded down (removing my SiL's decorations), and repainted. I painted the bottom of the table to match our other white painted furniture, and the table top in black chalkboard paint (allows chalk doodles and hides crayon marks).

What about the chairs you ask? My MiL found the chairs that my DH and SiL used when they were children. Fortunately they were in great shape. She also sewed cute little seat cushions for the chairs, and had enough fabric left over for me to make matching bags to hang on the chairs.

DH also drilled holes in corresponding table legs large enough to insert a sturdy dowl that holds a paper roll.

Before:
Original Design:
After:
The Cost Breakdown:
Table $0
Chairs $0
Paint $0 (Already in Stash)
Dowl $2

Total Cost $2

Oops...I upcycled all over the wall.

I generally take issue with the word "upcycle", preferring to use the word "reuse."

The word upcycle was origionally proposed in the book, From the Cradle to the Grave: Remaking the Way We Make Things, by McDonough and Braungart. It was coined to give a name to the use of waste materials to make useful products. It is also obviously playing off the word recycle, that is now in the common vernacular, and is common practice. Recycling is the reprocessing of old materials into new products. The problem with recycling is that many of the most commonly recycled goods, i.e. paper and plastic, are turned into a lower quality good. For instance, recycled plastics are a lower grade than the plastics they were made of.

I believe that the word "upcycle" implies the opposite of "recycle," or the making of higher quality material from waste goods; however, in upcycling the nature of the good does not change, it is simply used in a new way. "Reuse" seems to me a far more appropriate term for the process.

However, I believe that I may have finally produced a product worthy of the name "upcycle."

A few years ago my grandmother gave me a beautiful ornate picture frame, with a gorgeous picture in it, that just didn't match my style.

The picture in question.

After about a year of looking at this picture frame everyday, I was in need of a message board, but I really didn't want a giant ugly white board on my wall. Finally, I had a use for the frame. I decided to paint the back of the glass in the frame leaving the front of the glass a perfect surface for dry erase markers. This system worked perfectly for about two years, but I was never very happy about the look of the paint on the glass.

The painted white board.

Then I found out about looking glass paint.

Looking Glass is a spray paint by Krylon that creates a mirror finish on plain glass. So I scraped all the paint off the back of the glass, and painted the back of the glass with Looking Glass twice. The finish I got is very similar to an antique mirror. I do not know if this is the finish that the paint should produce because despite the admonition on the bottle that the paint should not be used in high humidity, Florida did not provide me with humidity under 70%. The finish is however, exactly what I was hoping for, and I think it turned out beautifully. Unfortunately the picture really doesn't do it justice.

The new mirror message board.